Warehouse Safety: Top 10 Tips to Reduce Hazards and Stay OSHA-Compliant

Text graphic stating "Industry Leading Safety Products Made to Last" emphasizing warehouse safety and durability.

Most workplace injuries in a warehouse trace back to hazards warehouse workers walk past every shift. An open ladderway at the mezzanine. A forklift aisle with no defined pedestrian crossing. An extension cord stretched across the warehouse floor that was supposed to be gone by Tuesday.

Good warehouse safety starts by putting physical controls on those potential hazards, then backing them up with proper training and a written warehouse safety program. The timing matters, too. OSHA revised its National Emphasis Program on Warehousing and Distribution Center Operations effective July 31, 2026, and extended it through 2031. Inspections under the program are comprehensive and cover powered industrial trucks, material handling and storage, walking-working surfaces, exit routes, and fire protection.

The ten warehouse safety tips below each pair a common safety concern with a practical control. Most reference OSHA’s general industry standards under 29 CFR 1910, which apply to the majority of warehouse operations.

1. Close Ladderway and Mezzanine Openings with Self-Closing Gates

A fall from a mezzanine or platform onto a concrete floor can cause serious injuries in an instant, and catastrophic injuries are a real possibility at height. Mezzanines, pick modules, and roof access ladders all leave a gap in the guardrail. OSHA requires that gap to be protected by a self-closing gate or an offset that keeps employees from walking directly into the opening (29 CFR 1910.28(b)(3) and 1910.29(b)(13)). Chains and drop bars depend on someone remembering to reset them, and the worker reattaching a chain is often standing with their back to the drop.

Intrepid® Universal Gravity-Closing Safety Gates (UDG) add passive fall prevention to your fall protection systems at these openings. The gate uses gravity rather than springs to swing back to the closed position after every pass. The double-bar polyurethane gate resists corrosion, can be field cut to fit the opening, and comes in standard 22″, 27″, 32″, and 37″ sizes. Standard installation bolts to the guardrail with hot-dip galvanized hardware. Where drilling is impractical, an optional No-Drill Mounting Kit with stainless steel hardware is available.

2. Separate Pedestrians from Powered Industrial Trucks

Forklifts and motorized pallet jacks share aisles with people on foot in nearly every warehouse. Operator training under 1910.178(l) has long been among the most frequently cited standards in warehousing. Forklift operators must be trained, evaluated, and certified by the employer, and OSHA requires each truck to be examined before it is placed in service, at least daily.

Training only goes so far when vehicle paths and walkways overlap. Mark pedestrian walkways and forklift lanes clearly, set speed limits for material handling equipment, and require high visibility vests in forklift zones. At crossings and aisle entrances, physical warehouse safety barriers make people stop before they step out.

Intrepid® Pedestrian Barrier Gates (PG) provide ground-level access control at walkways, loading docks, equipment corridors, and restricted zones. They are a pedestrian control product and are not intended for fall protection at elevated openings. The optional Visual Warning Kit triggers a strobe when the gate opens, alerting forklift operators and equipment drivers that someone is entering the aisle.

3. Secure Stored Materials and Stop Dropped Objects

Falling materials are a significant concern in any warehouse, whether a carton slides off storage racks or a tool gets kicked off a mezzanine edge. Proper storage is the first defense. OSHA requires stored materials to be stacked, blocked, interlocked, and limited in height so they stay stable (1910.176(b)). Keep heavier loads on lower levels, stay within rack load ratings, and repair damaged uprights promptly.

At elevated edges, OSHA requires protection from falling objects where employees work below (1910.28(c)), and toeboards are one of the accepted protective measures. When used, toeboards must be at least 3.5 inches high. Intrepid manufactures polyurethane toeboards for elevated platforms, mezzanines, and industrial walkways, including walkways that run above conveyor belts and picking lanes.

4. Keep the Warehouse Floor Clear of Trip Hazards

Slips, trips, and falls on the same level are a constant safety concern. OSHA expects walking-working surfaces to be kept clean, orderly, and free of hazards (1910.22). A clean-as-you-go policy, prompt cleanup of wet surfaces, and adequate lighting in aisles and work areas all help. Many facilities also use 5S methods to keep tools and storage areas organized.

Cords are the trip hazard that grows quietly. Charging cords, scanner cables, and conveyor control wiring drift into walkways one run at a time until nobody notices them anymore. Cable Tracks organize cables, cords, hoses, and wires along walls, ceilings, floors, or cable stands, mounted horizontally or vertically. They are made from non-conductive glass-filled nylon and come in two sizes:

Size Holds cable up to
Standard 0.43 in (11 mm)
Heavy Duty 1.25 in (32 mm)

They install with cable ties, bolts, screws, or magnets (not supplied), are reusable and maintenance free, and will not fray, cut, or puncture the cable.

5. Elevate Temporary Cords and Hoses with High 5® Hooks

Temporary power runs during racking installs, dock repairs, and seasonal setups have a way of staying put long after the warehouse task is done. Getting those cords off the floor removes the trip hazard before workers start stepping over it as part of the routine.

High 5® Hooks support cords, hoses, and welding leads with a 250 lb load capacity. They hang from round pipe, angle iron, and square tube, come in Single, Double, Triple, and Grande configurations, and are reusable from one project to the next. The hooks are flame retardant with a UL94 HB rating and will not fray, cut, or puncture cables. For lighter runs, OktoLock® clips (75 lb capacity) and OktoLock® XL (250 lb) offer another dielectric option.

6. Match PPE to the Hazard and Keep Gloves with the Worker

Personal protective equipment starts with a hazard assessment. OSHA requires employers to assess workplace hazards, select appropriate PPE, and train workers to use it (1910.132). In a typical warehouse, that assessment points to safety shoes or protective-toe boots, gloves for material handling and hazardous materials, safety glasses where debris or chemicals are present, protective clothing where chemical exposure is possible, and hard hats where overhead hazards exist. Loose clothing should stay away from conveyor belts and other moving warehouse equipment.

PPE only protects workers when it is available and actually used. Gloves set down on a pallet tend to disappear right before someone handles banding or a sharp-edged carton. The 1939 Glove Guard® Clip secures gloves to the worker with interlocking teeth on both ends and a 15 lb safety breakaway. It is made in the USA, non-corrosive, non-conductive, and resists flex fatigue. Metal-detectable versions suit food distribution and cold storage operations, and multiple colors make it easy to separate departments or glove types.

7. Keep Safety Glasses Within Reach with Goggle Guard® Clips

Safety glasses left on a workbench do nothing during a strapping cut or a battery-charging task. Goggle Guard® Clips keep safety goggles and glasses attached to the hard hat or helmet so they are ready when the task calls for them. The 80 Series fits full-brim and cap-style hard hats, and the 82 Series fits ball caps and climbing-style helmets. The clips are non-corrosive and non-conductive, and they hold goggles without overstretching the strap.

8. Give Hard Hats and Tools a Home with Utility Catcher® Clips

Utility Catcher® Clips were originally designed to hold a hard hat when it is not in use. Teams also use them to secure tools, PPE, and other small items to belts, carts, and racking so gear stays organized and off the floor. It is a small fix that cuts down on misplaced equipment and the shortcuts that follow.

9. Protect Containment During Maintenance and Expansion Work

Roof repairs, sprinkler upgrades, and building expansions often bring scaffolding inside an active warehouse. Containment wrapped around exposed scaffold legs gets punctured, and sharp tube ends catch workers walking past.

Scaff Hatâ„¢ covers the top of scaffold legs on Cuplock, Pin Lock, and Peri Up systems, softening sharp tube edges and protecting regular poly, reinforced poly, shrink wrap, tarps, and canvas. The bright safety orange cap includes holes for pinning, installs quickly, and is reusable, which eliminates repeated taping and padding on every job.

10. Build a Warehouse Safety Program Around Training and Emergency Preparedness

Physical controls work best when people know why they are there. A written warehouse safety program ties the pieces together with clear safety protocols, assigned responsibilities, and a training schedule. New hires and temporary workers should complete a safety orientation before their first shift. OSHA’s Temporary Worker Initiative makes clear that the host employer and the staffing agency share responsibility for keeping those workers safe.

Proper Training and Ergonomics

Proper training should cover forklift operation and pedestrian rules, fall protection, PPE, housekeeping, and safe lifting. Improper lifting, repetitive lifting, and improper handling of awkward loads contribute to musculoskeletal disorders, which remain a significant concern in material handling work. Lifting aids, anti fatigue mats at fixed workstations, and regular refresher sessions help reduce strain. Workers who are properly trained are also better at spotting hazards before they turn into injuries.

Hazard Communication

Battery acid, cleaning chemicals, aerosols, and many stored products count as hazardous chemicals. OSHA’s Hazard Communication Standard (1910.1200) requires a written hazard communication program, labeled containers, accessible safety data sheets, and worker training. Hazard communication appears regularly on OSHA’s list of most frequently cited standards. Store hazardous materials away from forklift traffic, provide adequate ventilation in battery charging areas, and keep spill kits close to where chemicals are used.

Emergency Procedures and Fire Safety

An emergency action plan under 1910.38 covers evacuation procedures, how emergencies are reported, and who does what during an emergency response. When required, the plan must be in writing and available to employees, though employers with 10 or fewer employees may communicate it orally. Exit routes must stay unobstructed with proper lighting, and emergency exits must be marked with exit signs under 1910.37. Portable fire extinguishers need a monthly visual inspection and an annual maintenance check under 1910.157.

Keep first aid kits stocked, run drills so evacuation routes and emergency procedures become second nature, and coordinate with local emergency responders on site access and fire hazards such as battery charging areas and stored aerosols.

Signage, Audits, and Safety Culture

Post warehouse safety signs where decisions happen: aisle entrances, ladderways, dock edges, and charging areas. Accident prevention signs and tags fall under 1910.145.

Then walk the floor on a set schedule. Internal audits catch the gate that no longer closes fully, the toeboard section that was removed for a delivery and never replaced, and the cord that became permanent. Review incident logs and near-miss reports for patterns, and encourage workers to report hazards without hesitation. That habit is the foundation of a strong safety culture. Intrepid can also perform a facility review to identify where safety gates, barriers, and cable management would have the greatest impact.

One Source for Warehouse Safety Solutions

Most facilities piece together warehouse safety solutions from several vendors, which makes gaps harder to spot. Intrepid manufactures safety gates and toeboards and provides a broader range of cable management, PPE accessories, and industrial safety products from a single source. Employee owned and operating since 1978, the team at Intrepid supports warehouses, distribution centers, refineries, and offshore operations where worker safety cannot be left to chance.

Request a facility review or quote from Intrepid to see where gates, barriers, and cable management would make the biggest difference on your floor.

Warehouse Safety FAQs

What are the most common warehouse safety hazards?

Powered industrial truck traffic, falls from elevated surfaces, slips and trips, falling materials, improper lifting, and missing or unused PPE come up again and again. The goal is to eliminate hazards where possible, then control what remains with barriers, training, and routine inspection. Contact our team for help prioritizing the hazards in your facility.

Does OSHA require self-closing gates at mezzanine ladder openings?

Yes. OSHA requires ladderway openings in guardrail systems to be protected by a self-closing gate or an offset that prevents employees from walking directly into the opening. A gravity-closing gate such as the Intrepid® UDG restores the barrier automatically after each pass. Speak with Intrepid about sizing a gate for your opening.

Are pedestrian barrier gates the same as fall protection gates?

No. Pedestrian Barrier Gates control ground-level access around forklift aisles, walkways, and loading docks. Fall protection at ladderways and mezzanine openings calls for a self-closing gate designed for that purpose, such as the UDG. Ask our team which product fits each location.

What warehouse safety equipment should every facility have?

Start with self-closing gates at elevated openings, toeboards where objects could fall, pedestrian barriers at forklift crossings, cable management for cords and hoses, fire extinguishers, first aid kits, spill kits where chemicals are stored, and PPE accessories that keep gear with the worker. No single product ensures compliance on its own, and the right mix depends on your layout and operations. Request a facility-specific recommendation from Intrepid.

How often should warehouse safety inspections be done?

Many facilities complete a full walk-through monthly, with targeted checks after layout changes, construction, or incidents. Some items carry their own OSHA intervals: forklifts must be examined at least daily before use, and portable fire extinguishers need a monthly visual inspection. Get help building an inspection schedule that fits your facility.